80L Three Zones Cold Hot Impact Thermal Shock Chamber For Metal And Plastic Testing
Brief Introduction:
Programmable Three Zones Thermal Shock Test Chamber is used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.
Technical Specifications:
| Structure |
Pre-cooling Zone, Pre-heating Zone, Testing Zone (Selectable 2-Zone or 3-Zone Test for stationary object test) |
| Damper Device |
Forced Air Damper |
| Interior Material |
SUS#304 Stainless Steel |
| Exterior Material |
stainless steel with environmentally baking paint |
| Testing Shelves |
Stainless Steel Plate |
| Refrigeration |
Cascade Refrigeration System |
| Cooling Method |
Water/Air Cooling |
| Ambient Temperature |
5℃～30℃ |
| Pre-heating Temperature |
80℃～200℃ |
| Pre-cooling Temperature |
－40℃ (－60℃/－75℃)～－10℃ |
| High Temp. Shocking |
60℃～150℃ |
| Low Temp. Shocking |
A=―35℃～0℃
B=―55℃～10℃
C=―65℃～10℃
|
| Temp. Uniformity |
Less than ±2℃ |
| Transition time |
<10 seconds |
| High Temp. Recovery time |
RT℃～150℃/5min |
| Low Temp. Recovery time |
RT℃～－75℃/5min |
| Pre-heating Time |
40min (30min for 56L) |
| Pre-cooling Time |
80min (60min for 56L) |
| Controller |
Powerful interactive LCD touch screen controller |
| Setting Range |
Temperature: －200℃～300℃
Time: 0H1m～9999H59m
Cycle: 1～9999cycle
|
| Resolution |
Temperature: 0.01℃
Time: 1min
|
| Control Method |
PID+SSR |
| Power supply |
AC380V/50Hz/3P |
| Accessories |
Viewing Window, Cable Port, Chamber Illumination,
LCD touch screen controller, Power cable
|
| Security System |
Overheat Protector, Compressor overload protector, Controller protector, Motor overload protector |
Notes:
1. Ambient temperature of +23℃ and a cooling water temperature of +25℃
2. During pre-heating, prevention for temperature heat-up may be worked
3. Performance shown above conforms to IEC61300-2-47
4. Temperature heat-up/pull-down time is applicable only during independent chamber operation
QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition after transfer.
QTS3 Features:
1. Automatically setting of pro-cooled and pre-heated air.
2. Testing samples don’t move, cable port is available for power on testing.
3. Powerful interactive touch screen controller, easy operation and setting
4. High accurate temperature recovery with PID auto tuning
5. Auto defrost function
6. All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
7. Operation data can be downloaded as needed, or continually, to USB.
8. Controller can set 120 programs and each program can be repeated for max 9999 times.
9. Machine can be shut down automatically in case of electrical power instabilities
Model Selection:
| Model |
Interior dimensions
(W ×H × D)
|
Interior Volume |
Exterior dimensions
(W ×H × D)
|
Specimen loading weight |
| QT3-56A/B/C |
400 ×350× 400mm
15.7”×13.8”×15.7”
|
56L |
1450× 1950 ×1600mm
57.1” ×76.8” ×63.0”
|
2.5Kg |
| QT3-80A/B/C |
500 ×400× 400mm
19.7”×15.7”×15.7”
|
80L |
1550× 2050 ×1600mm
61.0” ×80.7” ×63.0”
|
5.0Kg |
| QT3-150A/B/C |
600 ×500× 500mm
23.6”×19.7”×19.7”
|
150L |
1650× 2150 ×1800mm
64.9” ×84.7” ×70.9”
|
7.5Kg |
| QT3-225A/B/C |
750 ×600× 500mm
29.5”×23.6”×19.7”
|
225L |
1850× 2250 ×1800mm
72.8” ×88.6” ×70.9”
|
7.5Kg |
Product Tags:
|
|
80L Three Zones Cold Hot Impact Thermal Shock Chamber For Metal And PlasticTesting Images
|
